Wolder Mitab FUNK

firmware Wolder Mitab FUNK

 

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device Connected!
Interface test : Passed

Device mode : Normal [ LOADER OPEN ]

Machine : RK2929
Device  : MITAB FUNK
ExtInfo : 0.2.3

SoC CPU : 290X
SoC PDT : 2010
SoC SWN : 1001
SoC REV : V100

Flash CSx  : 0x00
Flash Type : 2C68044AA9 [ NAND ]
Flash Vend : MICRON
Flash Size : 0x0000000100000000 ( 4.00 GiB )
Flash Info : 1048576/4096/30/24/1

Connect Ok!

Brand     : Android
ProdName  : rk29sdk
ProdModel : miTab FUNK
Device    : rk29sdk
AndroidVer: 4.0.4
Manufact. : unknown
SysPatch  : IMM76D
RKTxCPU   : RK29XX

DevInfo : RK29XX__unknown__Android__ANDR_v4.0.4__miTab_FUNK__rk29sdk__rk29sdk

Reading Flash Content ...

[Read Ok] : param.cfg
[Read Ok] : misc.img
[Read Ok] : kernel.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : backup.img
[Read Ok] : system.img

Android Info saved!

Read finished!
Configuration : RK2929 / 2C68044AA9 [ NAND ]
Firmware Size : 1058 MiB